Skip to content

How To Sharpen Your Knife

How to Sharpen your Knife

[Videos are at the bottom of the page]

Before learning how to sharpen your knife properly, understand why it’s important to use a sharp knife

1. Safety: a dull blade will slip on food and increase the chance of injury.

2. Efficiency: you can cut more food in less time with a sharp blade.

3. Appearance: especially true for raw foods, a sharp blade is essential for aesthetics and presentation

4. Yield: maximize your yield and minimize food waste

5. Quality: ever notice that cutting with a dull blade makes herbs or vegetables oxidize more quickly? Chiffonade basil or slice sashimi with a dull blade and sharp blade and see the difference. A dull blade presses down on food, damaging it on a cellular level. This not only makes the food lose more moisture but alters the appearance and taste as well.

Learn how to test the sharpness of the blade

1. Paper method: use the weight of your knife to shave thin strips of paper. A sharp blade will slice right through and make a smooth cut whereas a dull blade will leave jagged edges or get caught. Make sure the knife or paper is not damp.

How to Sharpen your Knife
(A jagged cut with a blunt knife)
How to Sharpen your Knife
(A clean cut after sharpening the same knife)

2. Nail method: gently use the weight of the knife and place the blade on your fingernail. If the blade is dull it will slip across but if it is sharp it will dig in a little and you will feel a slight resistance.

How to Sharpen your Knife

3.Food test: there's no better way to test the sharpness of your knife than cutting food. Simply test your knife on vegetables such as tomatoes, scallion and onions or whatever ingredient the knife will be used for.

Did you know?

To the naked eye, a sharp edge looks smooth but at a microscopic level, a sharp edge is actually serrated.  Think about when you try to cut a tomato with a dull knife. It doesn’t slice through because the edge is smooth and slips against the skin.

How to Sharpen your KnifeHow to Sharpen your Knife

A new sharp blade magnified at 2000x. You can see that the edge is jagged. The cross section of a sharp knife is show in the second image.

 How to Sharpen your KnifeHow to Sharpen your Knife

A used dull blade magnified at 2000x. You can see that the edge is actually smooth. The cross section of a dull knife is shown in the second image.

3 Fundamentals in knife sharpening

1. Read your knife: learn to see and feel the blade. Is it sharp? Does it have nicks? What is the condition of the edge? You can even change the angle ratio of your knife once you can read your knife. For example, you can sharpen a double bevel knife with a 50/50 angle ratio to 60/40 or 70/30 to obtain something more similar to a Japanese style knife.

2. Keep your stone flat: when the stone is concave it is hard to control the arc of the knife. Many people undermine the importance of using a stone fixer to flatten out the surface of whetstones.

3. Use a stable surface: the stone should not budge while you sharpen.

Getting started

1.Always hold the knife at four points to keep the knife stable at the same angle. Your main hand should keep the knife steady and your other hand should just lightly guide its movement.

 How to Sharpen your Knife

2. Remember that there are different ways to sharpen a knife just as there are different ways to make a stock or roast a chicken. There is no one right way- you need to find the method that works best for you personally.

But here is the standard way knives are sharpened in Japan

[Videos are at the bottom of the page]

1. Soak the whetstone in water until the bubbles stop surfacing (ceramic stones that have not been baked do not need to be soaked before use).

2. Start with a rough grit stone if you have any nicks. If you are looking to sharpen a slightly dull knife, start with a medium grit stone. And if you are just looking to realign your edge and polish it, use a fine grit stone.

3. Choose a working surface that’s comfortable for you. It should not be so high that you strain your shoulders nor should it be so low that you have to lean forward.

4. Position the sharpening stone vertically in front of you and make sure that it has a stable base.

5. Make sure that your stone is flat. Use a stone fixer to level the sharpening surface.

How to Sharpen your Knife

Once you start flattening the stone, you will immediately see that the inner part of the stone has grooved in.

How to Sharpen your KnifeHow to Sharpen your Knife

Keep flattening the surface until you can see that the stone is completely flat.

6. Hold the three points on your knife and place in a 45 degree angle (with the tip facing away from you and heel facing towards you). Your arms should be relaxed and not bent in an awkward angle.

How to Sharpen your Knife

7. If you have a small nick on your blade hold the blade at a 45 degree angle from the surface of the stone. If you are just looking to do some light sharpening, hold it at a shallower angle (if you press the bevel right up against the stone you should not be able to see a shadow between the blade and stone).

8. Imagine that the knife has three different sections- start with the section closest to the tip and work your way towards the heel. Move your fingers down as you sharpen each section to stop your knife from moving all over the place. Lifting your pinky will help you prevent injuries.

How to Sharpen your Knife
How to Sharpen your Knife
How to Sharpen your Knife

9. Use a little more force when pushing the knife forward but relax your arms and follow a rhythm that works for you.

10. If you run your fingers from spine to edge on the side that was facing up you should be able to feel the burr (raised edge). If not, continue sharpening.

11. To realign or remove this burr, hold the knife in a 45 degree angle again with the heel facing away from you this time. Repeat steps 7-9. The amount of time you spend on the other side of your blade will depend on the bevel angle ratio you want to achieve. If you are sharpening a Japanese-stye single bevel knife, you still need to sharpen the back side to prevent the edge from eventually curving over. Simply sharpen with the blade flat against the stone.

How to Sharpen your Knife

12. You should not be able to feel a burr.

13. If you started with a coarse grit, repeat the sharpening process with a medium then fine grit to obtain a smooth surface along the bevel.

Finally, strop (or brush) the blade on your jeans or newspaper (leather is not the only thing you can use) to realign the edge for a finishing touch.

Masa of MTC Kitchen
Master Knife Sharpener Ino from Sakai
Sushi Chef Ichimura of Brushstroke
Takamura Cutlery Blacksmith Terukazu
Tsukiji Masamoto's President Hirano

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare